Skip navigation Wisconsin State Legislature
Up
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times.
NR 257.34 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.35 NR 257.35 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for existing sources. Degassing operations may not discharge wastewater pollutants. - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 257.35 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.36 NR 257.36 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for new sources. Degassing operations may not discharge wastewater pollutants. - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 257.36 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
subch. IV of ch. NR 257 Subchapter IV — The Forging Subcategory
NR 257.40 NR 257.40 Applicability; description of the forging subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from core and ancillary forging operations.
NR 257.40 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.41 NR 257.41 Specialized definitions. In addition to the definitions set forth in s. NR 257.03, the following definitions apply to the terms used in this subchapter:
NR 257.41(1) (1) “Ancillary operation” means any operation which is not a core operation but which is performed on-site following or preceding the forging operation, such as forging air pollution scrubbers, solution heat treatment, cleaning or etching.
NR 257.41(2) (2) “Core operation” means forging, artificial aging, annealing, degreasing, and sawing.
NR 257.41 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.44 NR 257.44 New source performance standards. Any new source subject to this subchapter shall achieve the following performance standards: - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times.
- See PDF for table PDF
1 Within the range of 7.0 to 10 at all times.
NR 257.44 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.45 NR 257.45 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for existing sources: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 257.45 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.46 NR 257.46 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for new sources:
- See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 257.46 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
subch. V of ch. NR 257 Subchapter V — The Drawing With Neat Oils Subcategory
NR 257.50 NR 257.50 Applicability; description of the drawing with neat oils subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from core and ancillary drawing with neat oils operations.
NR 257.50 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.51 NR 257.51 Specialized definitions. In addition to the definitions set forth in s. NR 257.03, the following definitions apply to the terms used in this subchapter:
NR 257.51(1) (1) “Ancillary operation” means any operation which is not a core operation but which is performed on-site following or preceding the drawing operation, such as continuous rod casting, solution heat treatment, and cleaning or etching.
NR 257.51(2) (2) “Core operation” means drawing with neat oils, stationary casting, artificial aging, annealing, degreasing, sawing, and swaging.
NR 257.51 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.52 NR 257.52 Effluent limitations representing the degree of effluent reduction attainable by application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT: - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times.
NR 257.52 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.53 NR 257.53 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BAT: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 257.53 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.54 NR 257.54 New source performance standards. Any new source subject to this subchapter shall achieve the following performance standards: - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times.
NR 257.54 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.55 NR 257.55 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for existing sources: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 257.55 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.56 NR 257.56 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for new sources: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 257.56 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
subch. VI of ch. NR 257 Subchapter VI — The Drawing With Emulsions or Soaps Subcategory
NR 257.60 NR 257.60 Applicability; description of the drawing with emulsions or soaps subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from core and ancillary drawing with emulsions or soaps operations.
NR 257.60 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.61 NR 257.61 Specialized definitions. In addition to the definitions set forth in s. NR 257.03, the following definitions apply to the terms used in this subchapter:
NR 257.61(1) (1) “Ancillary operation” means any operation which is not a core operation but which is performed on-site following or preceding the drawing operation, such as continuous rod casting, solution heat treatment, and cleaning or etching.
NR 257.61(2) (2) “Core operation” means drawing with emulsions or soaps, stationary casting, artificial aging, annealing, degreasing, sawing, and swaging.
NR 257.61 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.62 NR 257.62 Effluent limitations representing the degree of effluent reduction attainable by application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT: - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times.
NR 257.62 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.63 NR 257.63 Effluent limitations representing the degree of effluent reduction attainable by the application of best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BAT: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 257.63 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.64 NR 257.64 New source performance standards. Any new source subject to this subchapter shall achieve the following performance standards: - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times. - See PDF for table PDF
1 Within the range of 7.0 to 10 at all times.
NR 257.64 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.65 NR 257.65 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for existing sources: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 257.65 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.66 NR 257.66 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for new sources: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 257.66 History History: Cr. Register, November, 1989, No. 407, eff. 12-1-89.
NR 257.66 Note Note: The Wisconsin administrative code corresponds to the code of federal regulations according to the following table: - See PDF for table PDF
Down
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.